Battery Removal; Battery Installation - Polaris Sportsman 450 HO Manual Del Propietário

Battery
Improperly connecting or disconnecting battery cables can result in an explosion
and cause serious injury or death. When removing the battery, always
disconnect the negative (black) cable first. When reinstalling the battery, always
connect the negative (black) cable last.

Battery Removal

1. Place the transmission in PARK. Disconnect the battery hold-down
strap. Remove the battery cover (if equipped).
2. On conventional batteries, remove the battery vent tube.
3. Disconnect the black (negative) battery cable first. Disconnect the
red (positive) battery cable last.
4. Lift the battery out of the vehicle. Be careful not to tip a
conventional battery sideways, which could spill electrolyte. If
electrolyte spills, immediately wash it off with a solution of one
tablespoon baking soda and one cup water to prevent damage to the
vehicle.

Battery Installation

1. Ensure that the battery is fully charged. Place the battery in the
battery holder.
2. With conventional batteries, install the battery vent tube. The vent
tube must be free of obstructions and securely installed. Route the
tube away from the frame and vehicle body to prevent contact with
electrolyte.
Battery gases could accumulate in an improperly installed vent tube and cause
an explosion, resulting in serious injury or death. Always ensure that the vent
tube is free of obstructions and is securely installed as recommended.
MAINTENANCE
135