Engine Stop Switch - Polaris Sportsman 450 HO Manual Del Propietário

Switches
Main Key Switch
End all electrical power to the vehicle.
The LIGHTS ON position turns the headlights
on. The engine stop switch must be in the RUN
position.
Start the engine. The headlights are not on in
this position.
After starting the engine, release the key switch to the PARKING
LIGHTS ON position. The parking lights and taillights are on in
this position.
Do not attach a large key fob or key ring to the main switch. It may contact the
gas tank cap when turning, causing an interruption to the electrical system and
an unexpected engine shut-down during operation. This could result in serious
injury or death.

Engine Stop Switch

The engine will not start or run when the
switch is in the OFF position.
OFF (STOP)
RUN
Light Switch (High/Low Beam)
Use the light switch to change the
headlights from high beam to low beam.
High Beam
Low Beam
FEATURES AND CONTROLS
Light
Switch
Override
Switch
Horn
Switch
Engine
Stop
Switch
Hazard
Switch
Turn
Signal
Switch
25