SRAM Rock Shox Reverb Bleed Kit Manual Del Usuario página 17

Reverb Bleed Kit User Manual
8 RepOsiTiON THe ReMOTe AND seATpOsT
Use a T25 TORX to loosen the remote clamp bolt. Rotate the remote to the desired
position on the handlebar. Tighten the remote clamp bolt to 5-6 N∙m (43-52 in-lb).
Turn the speed adjuster to the desired setting.
Spray isopropyl alcohol on the remote assembly, hose, and seatpost and clean them
with a lint-free rag.
Remove the bicycle from the bike stand.
Set the seatpost to the desired height then tighten the seatpost binder bolt/quick
release to the frame manufacturer's recommendation. Do not exceed 6.7 N∙m (60 in-lb).
Secure the hose to the bicycle frame.
Copyright © 2011 SRAM, LLC
BleeD pROceDURes
English
17