Warranty Disclaimer; Symbols With Explanations - St. Jude Medical PressureWire Aeris Instrucciones De Uso

Rated maximum output
power of transmitter
(W)
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance (d) in
metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
*Not applicable since the transmitter is not connected to mains.
NOTE: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.

WARRANTY DISCLAIMER

Although PressureWire, hereafter referred to as "product", has been manufactured under carefully controlled conditions, St
Jude Medical, hereafter called SJM, has no control over the conditions under which the product is used. SJM, therefore dis-
claims all warranties, both expressed and implied, with respect to the product, including, but not limited to, any implied war-
ranty of merchantability or fitness for a particular purpose. SJM shall not be liable to any person or entity for any medical
expenses or any direct, incidental or consequential damages caused by any use, defect, failure or malfunction of the prod-
uct, whether a claim for such damages is based upon warranty, contract, tort or otherwise. No person has any authority to
bind SJM to any representation or warranty with respect to the product. The exclusions and limitations set out above are
not intended to, and should not be construed so as to contravene mandatory provisions of applicable law. If any part or term
of this Disclaimer of Warranty is held to be illegal, unenforceable or in conflict with applicable law by court of competent ju-
risdiction, the validity of the remaining portions of this Disclaimer of Warranty shall not be affected, and all rights and obliga-
tions shall be construed and enforced as if this Disclaimer of Warranty did not contain the particular part or term held to be
invalid.

SYMBOLS WITH EXPLANATIONS

A gile T ip
Separation distance to frequency of transmitter (m)
150 kHz to 80 MHz*
d = 1,2√ P
N/A
Guidewire Mounted Sensor.
Agile Tip.
Instructions for Use.
Guidewire mounted pressure sensor, disconnectable transmitter, torque device.
Caution (Attention, consult accompanying documents).
Follow instructions for use.
Use-by date.
Manufacturer.
Manufacturing facility.
European Representative.
Date of manufacture.
80 MHz to 800 MHz
d = 1,2√ P
12
12
800 Mhz to 2,5 GHz
d = 2,3√ P
23