Safety Regulations - Corghi ICL IW Manual De Uso

SAFETY REGULATIONS

WARNING
Failure to observe these instructions and the relative danger warnings can cause
serious injury to the operator or other persons.
Do not use the machine until you have read and understood all the danger/warning/
attention notices in this manual. This machine must be used only by qualified and
authorised personnel.
A qualified operator is construed as a person who has read and understood the manufac-
turer's instructions, is suitably trained, and is conversant with safety and adjustment
procedures to be adhered to during operations. Operators are expressly forbidden from
using the machine under the influence of alcohol or drugs capable of affecting physical and
mental capacity.
The following conditions are essential:
- read and understand all the instructions on how to use the machine;
- have a thorough knowledge of the capacities and characteristics of the machine;
- keep unauthorised persons well clear of the area of operation;
- make sure that the machine has been installed in compliance with established legisla-
tion and standards;
- make sure that all machine operators are suitably trained, that they are capable of using
the machine correctly and that they are adequately supervised during work;
- do not touch power lines or the inside of electric motors or other electrical equipment
until the power has been disconnected;
- read this manual carefully and learn how to use the machine correctly and safely;
- always keep this manual in a place where it can be readily consulted when working with
the machine and do not fail to refer to the manual whenever in need of confirmation or
explanations.
WARNING
Do not remove or deface the DANGER, ATTENTION, WARNING OR INSTRUCTION
decals. Replace any missing or illegible Safety, Danger or Instruction decals. Replace-
ment decals can be obtained from your nearest CORGHI dealer.
- When using and carrying out maintenance on the machine, observe the unified industrial
accident prevention regulations for high voltage industrial equipment and rotating
machinery.
- Any unauthorised alterations made to the machine automatically release the manufac-
turer from any liability in the case of damage or accidents as a result of such alterations.
Specifically, tampering with or removing the machine's safety devices is a breach of the
regulations for industrial accident prevention.
WARNING
During work and maintenance operations, always tie up long hair and do not wear loose
clothing, ties, necklaces, wristwatches or any other items that may get caught up in the
moving parts.
ICL IW - ICL 8" IW operator's manual
GB
29