Interface; Buttons; Technical Programming; Getting Into The Settings Menu - Expobar Brilliance Manual De Usuario

13 I
NTERFACE

13.1 Buttons

-
K1
Canc
K2
K3
K4
+
K5
Enter
K6
K7
K8
14 T
ECHNICAL PROGRAMMING
To set which button makes what on the machine, set prizing, and adjust different parameters of the
machine.
-
K1
Canc
K2
K3
K4
+
K5
Enter
K6
K7
K8
off the machine as to get into the settings menu..
:
Eight buttons are available as to select 8 different beverages.
Moreover, this buttons have some supplementary functions as below
(while in settings menu):
Button Supplementary
function
K1 - (Minus)
K2 Canc
K5 + (plus)
K6 Enter
Note: An option exists on the settings menu, that inverts the position of the
keys on the keyboard (see the keyboard number inversion section on this
manual). If the Keyboard is not responding as expected, check that this
option is not enabled.

14.1 Getting into the settings menu

1
2
Function description
Decreases the numerical value or
the selection of the option on the
screen on that moment
Exits the actual menu; on the main
menu, exits settings menu
Increases the numerical value or
the selection of the option on the
screen on that moment
Confirms the option on the screen
on that moment
With the door open and the
power switched off, hold buttons
1&5 pressed and connect the
power of the machine. Wait for
the display of the machine to
show "info" (it will take 1 sec.
Aprox.), then you can release the
1 & 5 buttons. Now you are in
the settings menu.
Some times, it is hard to
maintain pressed both buttons at
the same time. If when trying to
2
access the settings menu, you get
in the display "Please Wait" or
any other message than "INFO",
please begin again from turning
33

• Interface:

English