Menu Doses Program; Doses Adjustment - Expobar Brilliance Manual De Usuario

14.5 Menu Doses Program

This menu allows the adjustment of the ingredients and doses of them
used in each of the available selections.
We access to this menu through the following screen: "Doses program":
Pressing the "Enter" button, we get into the menu. The display shows
then the selection "1" available to be adjusted:
Now we can either press "enter" and begin to adjust the "recipe" of
selection nr. 1, or press "esc" (button K2) and go back to the superior
menu, or move to the next/previous selection to be adjusted by pressing "+" / "-":
Canc
+
DOSE PROGRAM.
1
-
Enter
Canc
14.5.1

Doses Adjustment

Supposing we just pressed "enter" having "dose program 1" on the screen, we begin the adjustment
of the different parameters of button 1(We could return to superior menus, by pressing "esc").:
Enter
Coffee water Vol
Key 1 ## cc
Canc
Enter
Accordingly to this setting, during normal service of the machine, when button 1 is selected, the
machine will automatically grind the needed beans of coffee, and brew the espresso with the set
volume of water. If the quantity is set to 0, no espresso will be brewed on the selection, neither
grinding will be performed.
Enter
+
Brewing coffee 1
AFTER SOLUBILE
BEFORE SOLUBILE
Canc
-
Enter
Now it comes the time to set the water times for the soluble drinks brewed on the mixer. These
times set the quantity of water used to brew the selection. With buttons "+" and "-" we adjust the
times; with "enter" we accept the set times, and proceed to the next adjustment. The Time 1, sets
the time to get the main quantity of water for the brewing; the time 2, adjust the amount of water to
flush the mixer clean. Between them the pause can be adjusted with the time for "Pause Water 1".
The amount of water set here will be mixed with the soluble powders set in following parameters.
Enter
Time 1 Water 1
Key 1 #.# s.
Canc
Enter
Pause Water 1
Key 1 #.# s.
Canc
Enter
Time 2 Water 1
Key 1 #.# s.
Canc
Enter
Canc
+
DOSE PROGRAM.
-
Enter
The first adjustment available is the "Coffee Water Vol.". With it the
volume of water pumped to brew the espresso is set. With "+" and " -
", the volume is adjusted. With "enter" the quantity set is accepted, and
next parameter will be shown on the screen. The volume is measured
in Cubic centimeters.
Next setting, will adjust if the brewing of the espresso will be
done before, or after having brewed the part of soluble drinks.
Brewing coffee 1
One or the other option can be set by pressing "+" or "-".With
"enter" the selection set is accepted, and next parameter will be
shown on the screen.
Water1
Time 1 Water 1
+
....
2
-
Canc
Pause Water 1
35
• Technical programming
DOSES PROGRAM.
Enter Canc
DOSE PROGRAM.
1
Canc
+
DOSE PROGRAM.
8
-
Enter
Canc
Time 2 Water1
+
-
English