Maintenance Interval - Dolmar SP-7650.4 R Manual De Instrucciones

Retaining the straight pipe with a supplied hand strap
When storing the mist blower, retain the straight pipe with a supplied hand strap tied
to the frame.
Retaining the pipe in this position will be easy to transport the unit.

Maintenance interval

Operating time
Item
Engine oil Inspect
Replace
Tightening parts (bolt, Inspect
nut)
Strainer of solution Inspect
tank
Clean
Strainer of tube joint Inspect
Clean
Fuel tank Clean/inspect
Drain fuel
Throttle trigger Check function
Stop control lever Check function
Idle speed Inspect/adjust
Air cleaner Clean
Ignition plug Inspect
Cooling air duct Clean/inspect
Fuel pipe Inspect
Replace
Fuel filter Clean/replace
Clearance between Adjust
air intake valve and air
discharge valve
Oil tube Inspect
Engine overhaul
Carburetor Drain fuel
*1 Perform initial replacement after 20h operation.
*2 For the 200 operating hour inspection, request Authorized Service Center or a machine shop.
*3 After emptying the fuel tank, continue to run the engine and drain fuel in the carburetor.
Before After Daily
operation lubrication (10h)
27
30h 50h 200h
*1
*2
*2
*2
*2
Shutdown/ Corresponding
rest Page
13
23
25
22
22
23
23
—
26
*3
—
16
16
24
24
26
25
—
25
—
—
—
26
*3