System Master Sheet; Manufacturer; Purpose; Changes To The Design / Construction - Nussbaum POWER LIFT HF 4600 Instrucciones De Servicio

2

System master sheet

2.1

Manufacturer

Otto Nußbaum GmbH & Co.KG
Korker Straße 24
D-77694 Kehl-Bodersweier
2.2

Purpose

The lift is a lifting tool for raising vehicles with a total weight of 4600 kg in normal workshop operation, for a
maximum lift distribution of 1:3 in the drive-in or against the drive-in direction. A single load from only one or
two lifting arms may not happen.
Set up of the standard lift in explosion endangered workshops and humid spaces (e.g. washing halls) is
prohibited.
Lift operation is done directly on the operating column (see Data sheet).
After construction and maintenance changes on load carrying parts the lift must be inspected afterwards
by a specialist who approves the changes. If the set up location is changed, the lift must be checked
again by a specialist and changed approved.
Load carrying capacity of the POWER LIFT HF 4600:
POWER LIFT HF 4600 = 4,600 kg
2.3

Changes to the design / construction

Inspections by a technical expert are required before recommissioning (date, type of change, technical
expert signature).
______________________________________________________________________________________________________
______________________________________________________________________________________________________
Name, address of technical expert
_________________________________________________
Location, date
2.4

Changing the assembly location

Inspections by a technical expert are required before recommissioning (date, type of change, specialist
signature).
______________________________________________________________________________________________________
______________________________________________________________________________________________________
Name, address of technical expert
_________________________________________________
Location, date
OPI-POWER LIFT HF 4600-HYMAX HF 4600-V2.3-DE-EN-FR-ES-IT
_________________________________________________
Technical expert signature
_________________________________________________
Signature of Technical Expert of Safety inspections
59