Technical Information; Technical Data; Safety Devices - Nussbaum POWER LIFT HF 4600 Instrucciones De Servicio

3

Technical information

3.1

Technical data

Load carrying capacity: POWER LIFT HF 4600 =
Loading a lifting arm:
Load distribution:
POWER LIFT HF 4600:
Standard operating
voltage:
Motor capacity POWER
LIFT HF 4600:
Motor speed:
Hydraulic pump:
Lifting pressure:
Pressure relief valve:
Oil volume:
Noise level LpA:
On-site connection:
62
4600 kg
A single load from only
one lifting arm may not
happen
POWER LIFT HF 4600
max. 1:3 or 3:1 mm or
against the drive- in
direction
Lift / lowering time:
approx. 35 s/seamless 0 –
max 24 s with 1750 kg
3 ~/N+PE,400 volt, 50 Hz
3 kW
2880 rpm
2.7 cm³
120 bar
250 bar
Approx. 10 litres (HLP32)
≤ 70 dB
3~/N+PE, 400 V, 50 hz
with 16 A fuses, slow,
according to
VDE regulations
3.2

Safety devices

• Over-pressure valve
Hydraulic system fuse against over-pressure.
• Check valve
Secure the vehicle against unauthorised lower-
ing.
• Main switch with curtain lock device
Fuse to prevent unauthorised use.
• Command follow system with latch
Secure against unauthorised lowering of the lift.
• Deadman controls
Lift movement stops when the operating lever is
released.
• Foot bumpers on the lifting arms
Secure against shear and crushing points in the
foot area.
• Lifting arm block
Secures the lifting arm against horizontal move-
ment in a lifted condition.
• Operating lever with curtain lock device
Fuse to prevent unauthorised use.
OPI-POWER LIFT HF 4600-HYMAX HF 4600-V2.3-DE-EN-FR-ES-IT