Maintenance Plan - Nussbaum POWER LIFT HF 4600 Instrucciones De Servicio

7.1 Maintenance plan
i Before beginning service, disconnect from power. The work area around the lift is to be secured against
unauthorised use.
Visual Spray
inspection
Time frame Position
Type of
maintenance
12
1
11
2
10
365 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
365 x / 12
9 3
4
8
7 5
6
12
1
11
2
10
365 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
70
Oil Lubricate
The lift cylinder can sweat and small oil droplets can form on the base
plate, this is however, not a leak.
Model and information signs, labels, brief operating instructions,
safety stickers and warning information are to be cleaned and ex-
changed if damaged.
Check the foot bumper for condition and function. Exchange if dam-
aged.
The rubber acceptance plate is to be checked for wear and replaced
if necessary.
Check the tracks and the lift rail equalization parts for wear. After
cleaning, grease with multi-purpose grease. We exclusively recom-
mend that MO-2 high performance lubricating grease is used. (avail-
able for purchase directly from Oest).
Check the lifting arm block and gear for wear. Exchange if there is
visible damage.
OPI-POWER LIFT HF 4600-HYMAX HF 4600-V2.3-DE-EN-FR-ES-IT
Clean with Clean
compressed
air
Maintenance plan
Inspect