Technical Information; Technical Data; Sicherheitseinrichtungen - Nussbaum POWER LIFT HF 3S 5000 Instrucciones De Servicio

3

Technical information

3.1

Technical data

Total weight:
Load capacity lift
Load distribution
Effective lifting range of
the lift
Lifting time of lift
Lowering time of lift
Operating pressure with
load
Motor capacity
Motor speed
Hydraulic pump
Pressure relief valve
Filling volume oil con-
tainer
Hydraulic oil
Noise level
Operating voltage
On-site connection
Optional energy set
Pneumatic
connections for com-
pressed air
Socket
76
1,200 kg
5,000 kg
Max. 3:1 or 1:3 in or
against the drive-in di-
rection
Approx. 1,865 mm
Approx. 40 s with
4,800 kg load
Approx. 19 s with
4,800 kg load
Approx. 270 bars
3 kW
2,880 rpm
2.7 cm³/s
Approx. 290 bars
Approx. 10 litres
HLP 32
≤ 70 dB(A)
3 x 400 V, 50 Hz
3~/N+PE, 400 V, 50 Hz
with 16 A fuses, slow,
according to VDE regu-
lations
6-10 bar
220 V/50 Hz
3.2

Sicherheitseinrichtungen

• Deadman controls
Lift movement stops when the operating lever is
released.
• Main switch with curtain lock device
Fuse to prevent unauthorized use.
• Over-pressure valve
Hydraulic system fuse against over-pressure.
• Check valve
Secure the vehicle
lowering.
• Two independent cylinder systems
Each with a
Secure against unauthorized lowering of the lift.
• Lifting arm block
Secures the lifting arm against horizontal move-
ment in a lifted condition.
• Foot bumper (optional)
Secure against shear and crushing points in the
foot area of the lifting arm.
• CE stop and warning signal (optional)
Secure against shear and crushing points in the
foot area of the lifting arm.
• Operating lever with curtain lock device
Fuse to prevent unauthorized use.
OPI-POWER LIFT HF 3S 5000 - HYMAX HF 3S 5000-V1.1-DE-EN-FR-ES-IT
against unauthorized
command, follow system.