Proton PW953266 Manual De Funcionamiento página 12

Radio Mode Operations
DX SEEK
When the [ ] button is pressed and held in
position for 1 second or longer, search will be
performing in the direction of higher frequen-
cies. When the [ ] button is pressed and held
in position for 1 second or longer, search will be
performed in the direction of lower frequencies.
When seek tuning starts, "DX" appears in
*
the display.
LOCAL SEEK
If the [ ] button is pressed and held in
position for 1 second or longer, search will
be performing in the direction of higher
frequencies. When the [ ] button is pressed
and held for 1 second or longer, search
will be performed in the direction of lower
frequencies. Broadcast stations with good
reception sensitivity are selected.
When local seek starts, "LO" appears in
*
the display.
Manual tuning
1. Press the [BAND] button to select the de-
sired band F1,F2,F3 or AM
2. Press the [ ]/[ ] button to manually tune
in a station.
Preset memory function
Preset memory function can store up to 20
stations. There are five stations for each of
FM1, FM2, FM3 and AM (MW/LW).
12
Manual memory function
1. Press the [ BAND ] button and select a band
that you want to store in the memory.
2. Press the [ ]/[ ] button to tune into a de-
sired station.
3. Press and hold one of the [ DIRECT ] buttons
for 1 second or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 5 stations
that are automatically tuned in sequentially.
If 5 receivable stations cannot be received, a
previously stored station remains un-overwritten
at the memory position.
1. Press the [ BAND ] button and select the
desired band (FM or AM (MW/LW)).
2. Press and hold the [PS/AS] button for 1
second or longer. The stations with good
reception are stored automatically
the preset channels. "A-STORE" will be
displayed.
* Auto store is performed in current band.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press the
[PS/AS] button again to continue receiving
that station. "P-SCAN" will be displayed and
" " indicator lights in the display.
Note:
Be careful not to press and hold the
button for 1 second or longer, otherwise the
auto store function is engaged and the unit starts
storing stations.
Recalling a preset station
A total of 20 preset positions (5-FM1, 5-FM2,
5-FM3, 5-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[ DIRECT ] button recalls the stored radio
frequency automatically.
1. Press the [ BAND ] button and select the
desired band (FM or AM (MW/LW)).
2. Press the corresponding [ DIRECT ] button to
recall the stored station.
Automatic volume adjustment
to
The system is equipped with automatic volume
adjustment depends on radio reception.
When the radio reception is poor, system will
automatically decrease the volume output to
reduce the static noise.
System will return to normal volume state
automatically when the reception is good again.
[PS/AS]