Proton PW953266 Manual De Funcionamiento página 33

Troubleshooting
Problem
Audio streaming is disconnected
after telephone interrupt.
Cannot perform remote control for
audio streaming.
Audio streaming will begin to pulse
on/off when using your connected
phone.
Display is showing "BT AUDIO" but
there is no sound output.
Problem
When switching to USB
( iPod ) mode, "NO MEDIA" is
displayed.
iPod is not able to playback.
Cause
Some phones will disconnect A2DP
during telephone interrupt.
AVRCP is not connected.
Due to excessive Bluetooth
® activity
on a low bandwidth link. Some
phones will not handle this well.
Music in external audio player might
be paused.
There might be connection links
broken between the devices.
Cause
iPod cannot be detected.
iPod is not supported.
Measure
Reconnect A2DP/AVRCP ( Audio streaming profiles ) from the phone
again after telephone interrupt.
Disconnect and reconnect Bluetooth
®
Disconnect and pair the device again.
Or refresh Bluetooth service list in phone.
®
If your phone is facing this problem, please do not use your phone while
audio streaming.
Check whether both device and main unit are in play status. Change the
status in the device if necessary.
If problem persists, turn external music player off and on.
Please delete pairing information on both device and main unit and
start re-pairing.
Measure
Check the connection between iPod and the unit.
Unplug and reconnect the iPod again.
If problem persists, try restarting the iPod.
Check the iPod compatibility on page 30 .
connection if necessary.
33