Operations; Basic Operations; Switching The Display - Proton PW953266 Manual De Funcionamiento

5. OPERATIONS

Basic Operations

CAUTION
!
Be sure to lower the volume before switching
off the unit power or the ignition key. The
unit remembers its last volume setting. If
you switch the power off with the volume
up, when you switch the power back on, the
sudden loud volume may hurt your hearing
and damage the unit.
Note:
The buttons and rotary knob cannot be operated
simultaneously.
Turning on/off the power
Note:
Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Push the [ /VOL/MODE ] rotary knob.
2. The illumination and display on the unit light
up. The unit automatically remembers its
last operation mode and will automatically
switch to display that mode.
3. Push the [ /VOL/MODE ] rotary knob more
than 1 second to turn off the power for the
unit.
Note: Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 6.
Selecting a mode
1. Push the [ /VOL/MODE ] rotary knob to
change the operation mode.
2. Each time you push the [ /VOL ] rotary knob,
the operation mode changes in the following
order:
"TUNER" "CD" "USB/IPOD"
"BT AUDIO" "AUX1" "AUX2"
"TUNER" ...
Notes:
If the CD mode is selected when no disc is
inserted, the display shows "NO DISC".
If there is no USB memory device inserted
"NO MEDIA" will be shown for selection

Switching the display

1. Press the [DISP] button to select the desired
display.
2. Each time you press the [DISP] button, the
display switches in the following order:
For CD (MP3/WMA)/USB mode:
Clock Display Main Display (Track No./
Play time) File Name Folder Name
Title Tag Artist Tag Album Tag
Display...
For CD-DA/iPod mode:
Clock Display Main Display (Track No./
Play time) Title Tag Artist Tag
Tag Clock Display...
For BT BT AUDIO/AUX1/AUX2 mode
Clock Display BT AUDIO/AUX1/AUX2
Once selected, the preferred display
*
becomes the default display. When a
function adjustment such as volume is
made, the screen will momentarily switch
to that function's display several seconds
after the adjustment.
Adjusting the volume
Turning the [ / VOL/MODE ] rotary knob clock-
wise increases the volume; turning it counter
clockwise decreases the volume.
"VOL XX" will be displayed where "XX" is the
volume level from 0 (minimum) to 33 (maximum).
Note:
Factory default setting for volume is "VOL 13"
Audio mode adjustments
1. Press the [AUDIO] button less than 1 sec-
ond to enter the Audio Adjustment mode.
2. Press the [AUDIO] button to select the "item
name".
Clock
("VAPS") "BASS"
"BAL" "FAD"
3. Turning the [ /VOL/MODE ] rotary knob to
Album
.
"MID" "TREB"
9