Proton PW953266 Manual De Funcionamiento página 18

USB Operations
3. Tracks are played in the order that they
were recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
4. Some noise may occur depending on the type
of encoder software used while recording.
Precautions when creating MP3/WMA
on USB memory device
Usable sampling rates and bit rates:
MP3
Decode Format
MPEG 1, 2 and 2.5 - Layer 3
Sampling Rate
MPEG-1 : 32, 44.1, 48
(kHz)
MPEG-2 : 16, 22.05, 24
MPEG-2.5 : 8, 11.025, 12
Bit-rate (kbps) MPEG-1 : 32 - 320
MPEG-2 : 8 - 160
MPEG-2.5 : 8 - 160
VBR
WMA
Sampling rate 8, 16, 22.05, 32, 44.1
( kHz )
Bit-rate ( kbps )
48 - 192
18
Hot plugging function
This unit has the ability to recognize the
changes of connecting and disconnecting a
USB memory device.
When the unit is powered on, this function allows
you to start playing the tracks automatically
when the USB memory device is inserted.
Connecting a USB memory device
1. Connect the USB memory device into the port
with the correct direction.
2. Playback will begin from the first track on the
USB memory device.
Always insert the USB memory device
*
fully into the port. Incomplete connections
may cause the USB memory device to be
not recognizable.
Depending on the number of tracks
*
recorded, some amount of time may be
required until all tracks are read into the
unit.
USB memory devices may have different
*
shape depending on brands. Some USB
memory devices may not be able to plug
into the port due to the shape design.
Please use an extension cable instead.
Note:
Do not forcibly connect the USB memory device
to the port with incorrect direction as this will
damage the USB memory device as well as the
USB port.
Listening to a track with USB memory
device already connected to the unit
Push the [ /VOL/MODE ] rotary knob to select
the USB mode.
When the unit enters the USB mode, track will
start to play automatically.
If there is no USB memory device inserted,
"NO MEDIA" will be shown for selection
The operation mode changes in the
*
following order each time the [ /VOL/
MODE ] rotary knob is pushed.
"TUNER" "CD" "USB/IPOD"
AUDIO" "AUX1" "AUX2"
...
Unplug the USB memory device
Remove the USB memory device from the port
during USB mode, the unit will revert to Radio
mode automatically.
Alternatively, user can remove USB memory
device at any other mode. It is safe to remove
USB memory device during track playing.
"BT
"TUNER"