Installation (Dln-6390-7) - JUKI DLN-6390 Manual De Instrucciones

#. INSTALLATION (DLN-6390-7)

This item is applied only to the case where DLN-6390-7 is used.
WARNING :
• To prevent personal injury caused by abrupt start of the sewing machine, carry out the work after turning
OFF the power switch and a lapse of 5 minutes or more.
• To prevent damage of device caused by maloperation and wrong specifi cations, be sure to connect all the
corresponding connectors to the specifi ed places.
• To prevent personal injury caused by maloperation, be sure to lock the connector with lock.
• As for the details of handling respective devices, read carefully the Instruction Manuals supplied with the
devices before handling the devices.
1. Installing and settIng of SC-921
Install the motor and SC-921 referring to the Instruction Manual for SC-921.
For the V-belt and the motor pulley, use those supplied with the sewing machine.
To use SC-921 with DLN-6390-7, it is necessary to set the followings after set-up of SC-921.
3 4
3 4
3 4
5
6
5
6
5
6
– 8 –
1) Refer to "#-6 Setting for functions of
SC-921" in the INSTRUCTION MANUAL
for SC-921, and call the function setting
No. 95.
2) The type of machine head can be selected
switch 5 (
by pressing
* Refer to the "List of machine heads" on
the separate sheet or the Instruction Man-
ual for the machine head of your sewing
machine for the type of the machine head.
3) After selecting the type of machine head,
switch 3 (
by pressing
4 ), the step proceeds to 96 or 94, and
the display automatically changes to the
contents of the setting corresponding with
the type of machine head.
switch 6 ).
switch