Front Baby Seat For Bicycle - Front Head Tube Mounting System; Technical Features; Table Of Contents Of Product; Assembly Instructions - Bobike GO MINI Instrucciones De Uso

MINI

FRONT BABY SEAT FOR BICYCLE - FRONT HEAD TUBE MOUNTING SYSTEM

For child safety and for your peace of mind, Bobike has developed the perfect child
carrying solution that's suitable for a wide range of adult bicycles.
Our ergonomic child seats are all built with safety and comfort as the primary goals.
In this manual, you will find information on attaching the child bicycle seat to the frame
head tube of your bicycle.
Carefully read the manual for a safe and correct installation of the child bicycle
seat.

TECHNICAL FEATURES

• This child bicycle seat must not be mounted to bicycles fitted with rear shock
absorbers.
• This child bicycle seat must not be mounted to a racing bicycle with drop handlebar.
• This child bicycle seat must not be mounted to Motorized Vehicles such as Mopeds
and Scooters.
• This child bicycle seat must not be mounted in bicycles with triangular, square or
carbon fiber frames.
• The child seat can be fitted to standard Ø32 mm steering tubes and to MTB bikes with
Ø1-1/8" steering tubes.
• The child bicycle seat must be assembled on bicycles with wheels with diameters of
26", 28" and 29".
• This child bicycle seat is only suitable for carrying children with a maximum weight of
15 Kg (and children with recommended ages ranging from 9 months to 3 years of age -
with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed the
maximum permitted load permitted for the bicycle. Information on the maximum
load can be found in the operating instructions of the bicycle. You can also contact the
manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment of such
additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle rider does
not touch the child bicycle seat with the feet when in motion.
• It's very important to adjust correctly the seat and its component parts for optimum
comfort and safety of the child. It's also important that the seat does not slope forward
so that the child does not tend to slide out of it. It's also important that the backrest
slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle seat mounted.
• Check the instructions of the bicycle, and If you have any doubts on fitting the
child bicycle seat to your bicycle, please contact your bicycle supplier for further
information.

TABLE OF CONTENTS OF PRODUCT

A. Main seat | A1. Steel fixing rod ends | B. Safety belt | B1. Safety lock | B2. Belt adjuster |
B3. Central belt adjuster | B4. Safety buckle releases | B5. Safety buckle socket | B6. Hole
for belt adjustment | D. Footrest | D1. Footrest strap | D2. Footrest adjustment button
| D3. Footrest strap fixing peg | E. Mounting block | E1. Key | E2. 2 x Washers | E3. Split
ring | E4. 2 x M6x65 bolts | E5. Mounting block body | E5.1. Holes to insert the A1 rods |
E6. Kit B - for MTB Bicycle - 1-1/8" | E6.1. Front spacer of KIT B | E6.2. Rear fastening part
of KIT B | E6.3. 2 x nuts for KIT B | E7. Kit A - Standard for Ø 22-32 mm handlebars | E7.1.
Front spacer of KIT A | E7.2. Rear fastening part of KIT A | E7.3. Steel fastening plate for
KIT A | F. Batch serial number

ASSEMBLY INSTRUCTIONS

1. Start by making sure you have enough space on the bike's steering tube to assemble
the mounting block (E).
Otherwise, make sure that the steering tube is adjusted to a height that allows the block
(E) to be fitted and to provide sufficient room for the child's legs under the handlebar. In
case of doubt, consult the bicycle retailer or manufacturer.
4
EN.