How To Remove Your Front Baby Seat; Instructions For Use - Bobike GO MINI Instrucciones De Uso

button to fix the footrest (D) in the desired position. You will hear a slight click when the
operation is complete and the button (D2) will jump to its normal position.
Note - The chosen position should cause the child's knee to be slightly straighter rather
than bent, a more comfortable position.
13. Make sure you have followed and fulfilled all the instructions given. When done
so, the child bicycle seat is ready for use. IT IS MANDATORY TO READ the following
chapter on safety instructions about using your child bicycle seat.

14. HOW TO REMOVE YOUR FRONT BABY SEAT

To remove your child seat remove the split ring (E3) and pull the child seat upwards and
backwards to release it from the mounting block (E).

INSTRUCTIONS FOR USE

• The rider must be at least 16 years of age; Check legislation and national regulations
pertaining to this.
• Make sure that the weight and height of the child do not exceed the maximum
capacity of the seat, and check this at regular intervals. Check the weight of the child
before using the child seat. Under no circumstances should you use the child bicycle
seat to transport a child whose weight is above the permissible limit.
• Do not carry a child less than 9 months of age in this child bicycle seat. To be a passenger,
the child must be able to sit up straight with the head held upright while wearing a
bicycle helmet. A doctor should be consulted if the child's growth is questionable.
• Secure the child into child bicycle seat ensuring that all the safety belts and straps
applied firmly but not so tight as to cause discomfort to the child. Please check the
safety of the fasteners often.
• The child bicycle seat must never be used before adjusting the safety belt.
• Always use all safety restraint system and straps to ensure that the child is secured in
the seat.
• Do not allow any part of the child's body or clothing, shoelaces, child bicycle seat belts,
etc. to come in contact with moving parts of the bicycle because can be harmful to the
child or cause accidents.
• A wheel protector is recommended to prevent the child from inserting its feet or
hands between the spokes. The use of protection underneath the saddle or the use
of a saddle with internal springs is mandatory. Make certain that the child is not able to
hinder the brakes, thus avoiding accidents. These adjustments should be revised with
child´s growth.
• Dress the child in proper clothes according to weather conditions and use an
appropriate helmet.
• Children in child seats need to be more warmly dressed than riders of cycles and
should be protected from rain.
• You must cover any sharp or pointy objects on the bicycle that may be reached by the
child, in any situation.
• The seat and cushion can get hot if under the sun for a long time. Make sure that they
are not too hot before seating the child.
• Check for any laws and regulations that might be in force in your country. Relating to
the carrying of children in seats attached to cycles.
• Carry only children that are able to sit unaided for a longer period of time, at least as
long as the intended cycle journey.
• When the child bicycle seat is not in use, fasten the waist buckle of the security harness
to prevent the straps from dangling and entering in contact with some turning part of
the bicycle as wheels, brakes, etc. as these may be a hazard to the cyclist.
• When the steering angle to each side is reduced to less than 45º, change the type of
handlebar.
WARNING: Additional security devices shall always be fastened.
WARNING: Do not place any additional luggage on the seat, because the weight
cannot exceed 15 kg (33 lb). If you carry extra luggage, the bicycle's carrying capacity
must not be exceeded, and we recommend that it be placed at the rear of the bike.
WARNING: The turning circle will be restricted when using a front child seat. Pay
attention to this fact before setting off.
WARNING: It is extremely important to make sure that on the final part of the assembly,
you hand tighten the screws of the mounting block (E4) to make sure that the metallic
bracket (E) is totally secured and fastened correctly.
WARNING: Remove the seat when transporting the bicycle by car (outside the car).
Air turbulence might damage the seat or loosen its fastenings or other suspended
elements, which could lead to an accident.
6