Publicidad
130524
Thread take-up
lever cover
This is a cover for pre-
venting contact between
the human body and the
thread take-up lever.
Thread trimmer
hot wire cover
This is the cover for pro-
tecting the human body
from coming in contact
with the needle thread trim-
ming mechanism and the
hot wire.
Eye protection cover
This is a cover for pro-
tecting eyes from being
injured by a broken
needle.
High-temperature
warning seal
This label indicates that
there is a risk of burn by the
hot wire.
Protective cover
This is the cover for protecting the
human body from coming in contact
with the bobbin thread trimming
mechanism, hot wire, bobbin thread
detecting device and sensor device.
Safety switch
This switch is installed in
order to prevent the sewing
machine from rotating when
it is tilted for maintenance
and inspection.
In addition, be aware that the safety devices such as the "eye protection cover" and
"fi nger guard" are sometimes omitted in the sketches, illustrations and fi gures in-
cluded in the Instruction Manual for the explanation's sake. In the practical use, never
remove those safety devices.
Safety devices and warning labels
Warning label
against pinching
This label warns that fi ngers
or other parts of human
body can be pinched in the
thread take-up lever.
Finger guard
This is a cover for
preventing contact
between fi ngers and
the needle.
Electrical-shock
danger label
In order to protect
against electri-
cal shock, safety
precautions to
be taken to avoid
danger are written
on this label.
CAUTION
Warning label
(Refer
to the
The label gives the
warn-
minimum precau-
ing la-
tions to be taken
bel on
when operating the
page i.)
sewing machine.
Electrical-shock
danger label
This label indicates
that there is a risk of
(EU type)
electrical shock.
(Refer to
"Elec-
trical-
shock
(EU type)
danger
label" on
page i.)
vi
Warning label
against pinching
This label indicates
that there is a risk
of pinching hands
between the machine
head and the feed
bracket.
Warning label
against pinching
This label warns that
hands can be pinched
under the sewing ma-
chine.
Power switch
This is a switch for disconnect-
ing the power unit of the sew-
ing machine from the power
supply.
Power switch (EU type)
This switch is used
for disconnecting
the power unit of
the sewing machine
from the power sup-
ply. It is also used as
the emergency stop
switch.
Selection of the power switch
Use the IEC60204-1-compliant
power switch with rated cur-
rent of 20 A or more and short-
circuit breaking capacity of 120
A or more, which has the oper-
ating section in red against the
yellow background.
Publicidad
Capítulos
