Application Of Grease - JUKI LK-1942ZA5050 Manual De Instrucciones

130524

4. Application of grease

1. In the case the parts to be applied/fi lled with grease are disassembled and in the case the machine is
used more frequently than usual, grease should be added once every one or two years.
2. Grease to be used
JUKI grease A
・ Tube (10 g) JUKI part number: 40006323
・ Tube (100 g) JUKI part number: 23640204
3. How to fi ll grease
If you do not have a grease pump, it is recommended to fi ll a plastic oiler with grease or to use a syringe
with its needle removed for easier fi lling of grease.
・ Exclusive syringe for application: JUKI part number: GDS01007000
3
5
4
4
4
4
4
1) Open the lower hot-wire safety cover.
2) Apply JUKI grease A to sliding sections 1 and 2
2
of the lower hot wire link.
1
1) Remove the lower hot-wire safety cover.
2) Apply JUKI grease A to hot-wire cylinder fulcrum
section 3 .
1) Open the upper hot-wire safety cover.
2) Apply JUKI grease A to sliding section 4 of the
upper hot-wire link and to upper hot-wire cylinder
fulcrum section 5 .
– 17 –