Publicidad
130524
!. SPECIFICATIONS
1) Sewing area :
2) Max. sewing speed :
3) Stitch length :
4) Feed motion of work clamp foot :
5) Needle bar stroke :
6) Needle :
7) Lift of feeding frame :
8) Hook :
9) Intermediate presser stroke :
10) Lift of intermediate presser :
11) Lubricating oil :
12) Data recording :
13) Enlarging/Reducing facility :
Scale :
14) Enlarging/Reducing method :
15) Temporary stop function :
16) Thread breakage detection function :
17) Max. sewing speed limitation :
18) Pattern selection :
19) Thread trimming method
20) No bobbin-thread detection
21) Stitch skipping detection
22) Loaded bobbin-case detection
23) Bobbin thread counter :
24) Production counter :
25) Memory back-up :
26) Sewing machine motor :
27) Dimensions :
28) Weight :
29) Power consumption :
30) Operating temperature range :
31) Operating humidity range :
32) Line voltage :
33) Air pressure used :
34) Air consumption :
35) Needle bar reverse rotation stop function :
＊ Reduce the max. sewing speed in accordance with the sewing conditions.
＊ To select and use either the bobbin thread counter or the production counter.
36) Noise :
X (lateral) direction 100 mm Y (longitudinal) direction 60 mm
＊ 1,600 sti/min (When sewing pitch is less than 4.3 mm.)
0.1 to 10.0 mm (adjustable in 0.1 mm step)
Intermittent feed (2-shaft drive by stepping motor)
41.2 mm
DP x 17, #24 to #26 (#25 is attached at the time of delivery.)
18 mm (standard) Max. 25 mm
Full-rotary three-fold capacity hook
4 mm (standard) (Adjustable in the range of 0 and 4 to 10 mm)
18 mm
New Defrix Oil No. 2 (supplied by oiler)
EEP-ROM (32k byte)
Allows a pattern to be enlarged or reduced on the X axis and Y axis
independently when sewing a pattern
20% to 200% (1% step)
Pattern enlargement / reduction can be done by increasing/de-
creasing the stitch length
Used to stop machine operation during a stitching cycle.
Used to detect needle thread breakage to automatically stop ma-
chine.
The max. sewing speed can be set limited to any value within a
range of 200 to 1,600 sti/min using the up/down key. (100 sti/min
steps)
1 to 99 patterns can be selected by specifying the desired pattern
Nos.
Needle/bobbin thread heat cutter
Provided
Provided
Provided
Tells the time to replace the bobbin by the bobbin thread counter.
(Max. 9,999 pcs.)
Displays the number of pieces of production by the production
counter. (Max. 9,999 pcs.)
In case of a power interruption, the pattern being used will auto-
matically be stored in memory.
550W servo motor (Direct-drive)
W : 600 mm L : 750 mm H : 1,240 mm
(Use the standard table and stand.)
Machine head : 46 kg, Device : 110kg
600 W
5 ˚C to 35 ˚C
35% to 85% (No dew condensation)
Rated voltage ± 10% 50/60 HZ
0.5 to 0.55 MPa {5 to 5.5 kgf/cm
1.3 R/min
After the completion of sewing, the needle can be stopped in its up-
per position by rotating the needle bar in the reverse direction.
- Equivalent continuous emission sound pressure level (L
workstation :
A-weighted value of 79.5 dB; (Includes K
to ISO 10821- C.6.3 -ISO 11204 GR2 at 1,600 sti/min.
– 1 –
2
}
) at the
pA
= 2.5 dB); according
pA
Publicidad
Capítulos
