Communication Parameters - Balluff BIP LD2-T017-01-EP Serie Manual De Instrucciones

BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System
6
IO-Link interface (continued)
6.2

Communication parameters

Specification
Transfer rate
Minimum cycle time of device
Frame specification
– Amount of preoperate data required
– Amount of operate data required
– Enhanced parameters
IO-Link protocol version
IO-Link profile
Amount of process data
from the device to the master
Amount of process data
from the master to the device
Manufacturer ID
Device identification
Tab. 6-1: Device specification
Transfer times
Process data cycle with 1.0 master
Process data cycle with 1.1 master
Tab. 6-2: Device transfer times
www.balluff.com
IO-Link Description
COM2
min cycle time
M-Sequence Capability:
– M-Sequence Type Preoperate
– M-Sequence Type Operate
– ISDU supported
Revision ID
Profile
ProcessDataIn
ProcessDataOut
Vendor ID
Device ID
Amount of PD x master cycle time = 2 x 3 ms = 6 ms
Master cycle time = 3 ms
Value
38.4 kBaud
0x1E (3 ms)
0x19
2 bytes
1 byte
Supported
0x11 (Version 1.1)
Smart Sensor Profile 10042_V1.0
0x83 (bytes)
0x00 (4 bits)
0x378
0x020309
english 11