Identification Data - Balluff BIP LD2-T017-01-EP Serie Manual De Instrucciones

BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System
6
IO-Link interface (continued)
6.4

Identification data

Index Parameters
hex (dec)
0x0010 (16) Vendor Name
0x0011 (17) Vendor Text
0x0012 (18) Product Name
0x0013 (19) Product ID
0x0014 (20) Product Text
0x0016 (22) Hardware Revision
0x0017 (23) Firmware Revision
0x0018 (24) Application Specific Tag
0x0019 (25) Function Tag
0x001A (26) Location Tag
Tab. 6-5: IO-Link identification data
Access to subindex 0 addresses the entire
object of an index. Access of subindices >0
addresses the individual elements of an index.
Device Access Locks
With this standard parameter, it is possible to activate or
deactivate certain functions of the IO-Link device. With the
BIP, there is the option to lock the function of the
parameter manager. To do so, bit 1 of the 2-byte value
must be set to 1 (locked). In order to unlock the parameter
manager, bit 1 is set to 0.
Bit Function
0 Lock parameter access
1 Lock parameter
management
2 Lock local
parameterization
3 Lock local user interface
4...15 Reserved
Tab. 6-6: Lock parameter data
www.balluff.com
Data format (length)
StringT (7 bytes)
StringT (21 bytes)
StringT (25 bytes)
StringT (7 bytes)
StringT (28 bytes)
StringT (3 bytes)
StringT (8 bytes)
StringT (max. 32 bytes)
StringT (max. 32 bytes)
StringT (max. 32 bytes)
Lock
Supported Not sup-
ported
X
X
X
X
Access Contents
Read only "BALLUFF"
Read only "innovating automation"
Read only "BIP LD2-T017-01-EP00,5-S4"
Read only "BIP001Y"
Read only "Inductive Positioning System"
Read only "02"
Read only "1.00.01"
Read/Write "***"
Read/Write "***"
Read/Write "***"
Profile Characteristic
This parameter indicates which profile is supported by the
IO-Link device.
The inductive positioning system BIP supports the Smart-
Sensor profile with a process data variable:
– Subindex 1: profileID
0x000A ("Measurement Data Channel (standard
resolution)")
– Subindex 2: Subindex 2: CommonApplicationProfileID
0x4000 ("Identification and Diagnosis")
– Subindex 3: FunctionClassID
0x8001 ("Diagnosis")
– Subindex 4: FunctionClassID
0x8004 ("TeachChannel")
PD Input Descriptor
This parameter describes the composition of the process
data variables used.
The BIP inductive positioning system processes the
process variables (see Tab. 6-7 on page 14).
Application Specific Tag
Application Specific Tag, Location Tag and Function tag
make it possible to assign the IO-Link device an arbitrary,
32-byte string. This can only be used for application-
specific identification and applied in the parameter
manager. The entire object is accessed via subindex 0.
english 13