FujiFilm SonoSite Edge II Manual De Instrucciones página 20

Table 1-4: Manufacturer's Declaration - Electromagnetic Immunity per IEC 60601-1-2:2007
IEC 60601 Test
Immunity Test
Level
Conducted RF 3 Vrms
IEC 61000-4-6 150 kHz to 80 MHz
Radiated RF 3 V/m
IEC 61000-4-3 80 MHz to 2.5 GHz
Note
U
At 80 MHz and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
18
Compliance
Level
3 Vrms
3 V/m
80 MHz to 2.5 GHz
is the AC mains voltage prior to application of the test level.
T
Electromagnetic Environment
Portable and mobile RF
communications equipment should be
used no closer to any part of the
FUJIFILM SonoSite ultrasound system
including cables, than the
recommended separation distance
calculated from the equation
applicable to the frequency of the
transmitter.
Recommended Separation Distance
= 1.2 √
d P
= 1.2 √ 80 MHz to 800 MHz
d P
= 2.3 √ 800 MHz to 2.5 GHz
d P
Where is the maximum output
P
power rating of the transmitter in
watts (10) according to the
transmitter manufacturer and it is the
recommended separation distance in
meters (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey
be less than the compliance level in
b
each frequency range
Interference may occur in the vicinity
of equipment marked with the
following symbol:
(IEC 60417 No. 417-IEC-5140:
"Source of non-ionizing radiation")
Manufacturer's declaration
a
, should
.