System Setup; Connectivity Settings (Sonosite Sii); Connectivity Setup (Sonosite Edge Ii); Network Status Settings - FujiFilm SonoSite Edge II Manual De Instrucciones

Contraindications
The SonoSite SII ultrasound system has no known contraindications.

System Setup

Connectivity settings (SonoSite SII)

All references to PDAS should be changed to SiteLink in the SonoSite SII system user guide; the revision will
be made in the next update.

Connectivity setup (SonoSite Edge II)

The following reference has been updated in the SonoSite Edge II system user guide; the revision will be
made in the next update.
To enable wireless connection
See Setting Up a Network Connection.


Network Status settings

If your Network Status screen displays a failed wireless device message, your network password may be
expired. Make sure that you have an updated network password before connecting your wireless device.

Imaging

The C8x transducer is needle guide-capable on both the SonoSite Edge II and SonoSite SII systems.

Imaging modes and exams available by transducer (SonoSite SII)

The following footnotes were missing from Table 4-5. Imaging modes and exams available by
transducer in the SonoSite SII system user guide; the revision will be made in the next update.
a
Exam type abbreviations are as follows: Abd = Abdomen, Art = Arterial, Bre = Breast, Crd = Cardiac, Gyn =
Gynecology, Msk = Musculoskeletal, Neo = Neonatal, Nrv = Nerve, OB = Obstetrical, Oph = Ophthalmic, Pro
= Prostate, SmP = Small Parts, Spn = Spine, Sup = Superficial, Ven = Venous.
b
The optimization settings for 2D are Res, Gen, and Pen.
c
The optimization settings for CPD and Color are low, medium, and high (flow sensitivity) with a range of
PRF settings for Color depending on the setting selected.
6 Connectivity settings (SonoSite SII)