Roche ACCU-CHEK Performa Nano Instrucciones De Uso página 17

Here is how to mark a test result and initiate a post-meal test reminder:
1. Perform a blood glucose test. The blood glucose result appears on the display.
2. Leave the test strip in the meter. Press and release
post-meal test reminder.
3. When the marker or test reminder that you wish to select appears on the display, remove the test strip
from the meter.
Unusual Blood Glucose Results
If your blood glucose result does not match how you feel, check this list to help solve the problem.
Troubleshooting Checks
1. Were the test strips expired?
2. Was the cap on the test strip container
closed tightly?
3. Was the test strip used immediately
after it was removed from the test strip
container?
4. Were the test strips stored in a cool, dry
place?
5. Did you follow the directions?
6. Are the meter and test strips working
properly?
7. Are you still unsure of the problem?
52493_07214103001_EN.indb 15
Blood Glucose Tests
to toggle through the test result markers and
Action
Discard the test strips if they are past the use by
date. Repeat the blood glucose test with an unexpired
test strip.
Replace the test strips if you think the test strip
container was uncapped for some time. Repeat the
blood glucose test.
Repeat the blood glucose test with a new test strip.
Repeat the blood glucose test with a properly stored
test strip.
See Chapter 2, Blood Glucose Tests, and repeat the
blood glucose test. Contact Roche if you still have
problems.
Perform a control test. See Chapter 4, Performing a
Control Test, for instructions.
Contact Roche.
2
15
6/13/14 2:32 PM