Setting The Test Reminders - Roche ACCU-CHEK Performa Nano Instrucciones De Uso

Setting the Test Reminders

NOTE
Test reminders:
• beep at the same time each day.
• beep every 2 minutes up to 3 times.
• turn off by inserting a test strip or pressing any
button.
1
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold until
set-up appears on the
Press and release
display.
repeatedly until the bell
symbol, OFF, set-up,
and the flashing A-1
appear on the display.
52493_07214103001_EN.indb 23
Meter Memory, Setup, and Data Transfer
• If a test was performed within 15 minutes of a
test reminder, the test reminder does not beep.
• If the meter is on at the test reminder time, the
test reminder does not beep.
• Exposure to cold conditions may disable test
reminders until the meter is turned on.
• If a test reminder is off in set-up mode, any
subsequent test reminders are also off. For
example, if you set A-1 but turn off A-2, then
A-3 and A-4 will automatically be off.
2 3
Press and release
to switch between On
and OFF.
Press and release
set your choice.
If On is selected, the
hour flashes.
3
4
or Press and release or
to adjust the hour.
Press and release to
to set the hour.
The minutes flash.
23
6/13/14 2:32 PM