Roche ACCU-CHEK Performa Nano Instrucciones De Uso página 23

Setting the Beeper On or OFF
NOTE
The beeper prompts you:
• to apply blood or control solution to the test strip.
• when enough blood or control solution is drawn into the test strip.
• when the blood glucose or control test is complete.
• when a button is pressed.
• when it is time to perform a test (if you set the test reminders or post-meal test reminder).
• if an error occurred while performing a blood glucose or control test (even if the beeper is off, it still
beeps for an error).
1
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold until
set-up appears on the
Press and release
display.
repeatedly until the
flashing beeper symbol
and On or OFF appear on
the display.
52493_07214103001_EN.indb 21
Meter Memory, Setup, and Data Transfer
2 3
Press and release
to switch between On
and OFF.
To set up more options,
press and release .
To exit, press and hold
until the flashing test
strip symbol appears on
the display.
3
or
21
6/13/14 2:32 PM