Meter Maintenance; Changing The Batteries - Roche ACCU-CHEK Performa Nano Instrucciones De Uso

Medidor de glucemia
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Meter Maintenance

The meter automatically tests its own systems every time you turn it on and lets you know if something
is wrong. See Chapter 5, Display and Error Messages.
If you drop the meter or think the results are not accurate, contact Roche.

Changing the Batteries

1
Use your thumb to slide
Remove the old batteries
the battery drawer out of
and place the new ones
the meter.
in the battery drawer
with the (+) side facing
down.
NOTE
• The meter uses two 3-volt lithium batteries, coin cell type CR2032. This type of battery can be found
in many stores. It is a good idea to have spare batteries available.
• Always replace both batteries at the same time and with the same brand.
52493_07214103001_EN.indb 31
Maintenance and Troubleshooting
2
3
Slide the battery drawer
back into position until it
locks into place.
The meter prompts you
for a time and date
confirmation when it is
turned on.
5
31
6/13/14 2:32 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido