Using the Accu-Chek Performa Nano System
• Use only Accu-Chek Performa test strips.
• Use the test strip immediately after removing it from the test strip container.
• Do not apply blood or control solution to the test strip before inserting it into the meter.
• Close the test strip container tightly immediately after removing a test strip to protect the test strips
from humidity.
• Store the unused test strips in their original test strip container with the cap closed.
• Check the use by date on the test strip container. Do not use the test strips after that date.
• Store the test strip container and meter in a cool, dry place such as a bedroom.
• Refer to the test strip package insert for test strip storage and system operating conditions.
WARNING
Do not store test strips in high heat and moisture areas (bathroom or kitchen)! Heat and moisture can
damage test strips.
NOTE
Your meter is already coded and comes with a pre-inserted black activation chip that you never need
to change. Even if you use test strips from test strip boxes that contain another chip that is a different
colour or has different code numbers, you never need to change the black activation chip again.
52493_07214103001_EN.indb 7
1
Your New System
6/13/14 2:32 PM
7