Publicidad
4.8 ESQUEMA DE INSTALACIÓN CON CABLE UTP CAT .5.
SCHEMATIC INSTALLATION WITH UTP CAT . 5 CABLE.
J2 (100 ohm)
J2 (100 ohm)
Configuration for
coaxial cable.
Telephone number pad
Main internal
Street panel
Configuration of
Number (No. 1)
street panel
Connection with straps:
Horizontal Wiring
Vertical Wiring
Horizontal Wiring
Vertical Wiring
The street panels of the two external accesses have a power supply.
The equipment of the two blocks of dwellings has one power supply
per block. The cables leaving terminal blocks 1 of power
supplies must never be connected to each other. However,
the cables leaving terminal blocks 2 of power supplies must
be connected to each other as they are the ground for the
system. The connection of audio/data between the main internal
and external accesses is made with the cables connected to terminal
block 3P of each street panel. The cables joining the different terminal
blocks 1P , 2P and 3P constitute the external bus of the street panels.
Each internal dwelling bus is formed by the cables leaving from
terminal blocks 1M, 2M and 3M of its main internal street panel audio
control group.
NOTE: In any of the previous diagrams, cable 1 leaving from power
supply ref. F1330 can be connected both to terminal block 1P and
to terminal block 1M of the digital audio group, as both terminals
are joined internally. The same is applicable to cable 2 leaving the
power supply and terminal blocks 2P and 2M of the audio group.
Horizontal Wiring
M1924
Do no shut-off the resistance
Horizontal Wiring
M1924
Shut-off the resistance
Auxiliary door opener push-button
Door opener
(12 Vdc, max 400mA)
J2 (100 ohm)
J2 (100 ohm)
F1330
Please see point 4.9 to install
alternating current door opener.
Publicidad
