Publicidad
3.3 INSTALACIÓN PLACA CALLE.
INSTALLATION OF THE STREET PANEL.
1
Assembly the flush
mounted box.
4
right screw and loosen the left one.
Move the street panel 1.5 mm to the right and the
front.
6
position of the camera and configure
the bridges according to the type of
cable installed.
2
Attach the street panel
using two screws.
To open towards the left.
Unscrew
Open the street panel.
7
Adjust the
STREET PANEL. PRESS UNTIL THEY CLIP IN.
3
screw and loosen the right one.
Move the street panel 1.5 mm to the left and the front.
5
Connect the cables to the audio control group.
Configure the street panel.
Adjust the audio volume in the street panel and the
dwelling.
COVERS BEFORE CLOSING THE
To open towards the right.
Unscrew left
Open the street panel.
8
Close the street panel by
tightening both screws.
Publicidad
