Publicidad
Two different types of access that may exist in an installation
are:
linked to each other by means of a cable bus called
, made up of wires 1P, 2P and 3P. These
street panels are not joined directly to any telephone/monitor
in dwellings. For example, the street panels of accesses
allowing passage from the street to common areas in
urbanisations will have to be configured as external access
(PE).
both to the external accesses via the external bus and to the
telephones/monitors of the dwellings by means of another
cable bus called
panels only connected to the internal dwelling bus (wires 1M,
2M and 3M), that always starts from a main internal access.
According to the way they are manufactured, there are two types
of street panel
These are street panels with a modular construction; that is
to say, according to the requirements of the installation, the
client will have to choose the references of modules from the
Guinaz catalogue to make up the street panel. These modules
are delivered individually and the client will assemble them to
form the panel. In general, a modular system street panel is
made up of the following modules:
- A digital audio control group with viewer. There are two
models according to whether the audio system is with
telephones (or monitors with telephone) or hands-free
monitors in the dwellings.
- A front audio module and a front window module on which
the audio control group will be assembled.
- As many digital pushbutton groups as are necessary for the
installation. There are also several models according to the
number of pushbuttons they contain. Each panel admits
43 pushbutton groups as a maximum and up to 255
call codes.
- A camera group if the installation requires a video signal
from the access where the street panel is to be installed.
There are several types of camera according to the type of
monitor installed in the dwellings.
- A front camera module on which the telecamera group will
be assembled.
- The supports necessary according to the number of columns
making up the street panel. All the modules necessary to
build the street panel will be assembled on these supports.
- Built-in boxes for placement on walls and which will contain
the street panels. As many built-in boxes as existing supports
will be needed.
- Other modules that serve to complete the street panel (e.g.,
blind modules) or to embellish the installation (frames,
viewers, surface boxes, etc.).
All the street panels that are only
This is the street panel linked
, made up by
These are the street
:
Publicidad
