Merit Medical SAFEGUARD FOCUS Instrucciones De Uso página 3

6. Bring short strap over shoulder and attach to top of balloon
border ensuring balloon is maintained over desired
compression area.
7. Trim excess strap material.
APPLYING COMPRESSION
8. Engage syringe with valve by inserting and a half twist.
9. Inflate balloon with up to 60ml of air observing compression
of site.
10. Disconnect syringe.
11. Continue to observe site and change air volume as needed
up to a total of 120ml of air.
12. If desired, annotate inflation time and volume on device.
REMOVAL
13. When compression is no longer needed, deflate the balloon
with syringe and carefully remove adhesive from skin or
detach hook and loop bands.
NOTE: If the SafeGuard FOCUS syringe is not available during
air removal or re-injection, the cap on the tubing line may
be removed by twisting and a standard luer syringe can be
attached.
14. Once adhesive is removed from skin do not attempt place
back on patient. If compression is still needed after removal a
new device should be used.
15. Dispose of SafeGuard FOCUS according to hospital protocol.
Caution: Federal (USA) law restricts this
device to sale by or on the order of a
physician.
Caution
Single Use
Do Not Re-sterilize
Do Not Use If Package is Damaged and
Consult Instruction for Use
Sterilized using ethylene oxide
Keep Dry
Catalog number
Lot Number
Keep away from sunlight
Use by date: YYYY-MM-DD
Date of Manufacture: YYYY-MM-DD
Medical Device
Unique Device Identifier
S i n g l e s t e r i l e b a r r i e r s y s t e m w i t h
protective packaging inside
Consult Instructions for Use
For electronic copy scan QR code, or go
to www.merit.com/ifu and enter IFU
ID. For printed copy, call U.S.A. or EU
Customer Service
Authorized Representative in European
Community
Manufacturer
Latex Free