Display And Keypad - Mettler Toledo IND560x Manual De Instalación

1.15.

Display and Keypad

The IND560x terminal has a Liquid Crystal Display (LCD), 128 × 64 dot matrix graphic type with a
white LED backlight. Figure 1-9 shows the IND560x's display and keyboard layout.
The display provides a system line at the top of the display for system messages and data;
application area with weight display, legends, data entry, and other information in the middle; and
softkey labels (icons) across the bottom.
The system line shows system messages and any asynchronous errors. The middle portion of the
display is reserved for the weight display and/or SmartTrac display. Random data entry (e.g. tare or
target ID) is shown in the bottom of this area. The bottom of the display is reserved for showing the
graphic labels (icons) for the softkeys. Display positions for up to five softkey icons are provided.
To the right of the softkey icon area is a reserved space for a MORE UP ( ) or a MORE DOWN ( )
indicator. If present, these indicate additional softkey selections are available by pressing either the
UP or DOWN navigation keys. A total of 15 softkeys may be programmed, depending upon the
weighing options and terminal functions enabled. These are presented in three sets of five softkeys.
The softkey setup and key mapping capabilities of the terminal determine the positioning of the
softkeys and locations where they display.
Three dedicated scale function keys are located to the right of the display. These are used to zero or
tare the scale and to initiate a print.
The terminal's 12-key numeric keypad is used to enter data and commands. The numeric keys
include a Clear key and a decimal point, and are located on the upper-right side of the terminal
front panel.
Five navigation keys are located below the three scale function keys. These keys enable the
operator to navigate through setup options in the menu tree and within setup and application
screens.
An On/Off power key is located at the lower right of the front panel. The On/Off power key is enabled
and disabled by a jumper on the main board.
1-22 METTLER TOLEDO IND560x Installation Manual
Display:
System line
Display:
Weight area
Display:
Softkey icons
Softkeys
Figure 1-9: The IND560x Display and Keyboard Layout
Scale function
keys
Numeric,
clear and
decimal keys
Navigation
and enter
keys
Power key
64061929 | 11 | 07/2017