Mettler Toledo IND560x Manual De Instalación página 48

2. Remove the two clamping brackets from the housing by sliding them toward the back of the
3. Locate the front panel mounting gasket included with the terminal (typically inserted between
3-4 METTLER TOLEDO IND560x Installation Manual
Figure 3-4: Clamping Bracket Components
enclosure (Figure 3-5).
pages of the Installation Manual) and remove the protective paper to expose its adhesive.
Adhere the gasket to the rear of the front panel of the terminal as shown in Figure 3-6, ensuring
that the gasket is flat and spaced evenly on all sides.
IMPORTANT: Use only the gasket which is specified and supplied by Mettler-Toledo, LLC.
When the panel version terminal is unmounted from a panel, the gasket must be replaced.
Figure 3-5: Removing Clamping Bracket
64061929 | 11 | 07/2017