Mettler Toledo IND560x Manual De Instalación página 69

9. One further connection is required, between J2 of the IND560x-PAB and J1 of the IND560x
10. Finally, the two wires from the NiMH battery connection cable terminate at the two terminals of
64061929 | 11 | 07/2017
functions. For proper function of the IND560x, it is critical that the connections between the
IND560x-PAB and the IND560x main board are correct.
main board. A connector is included in the IND560x-PAB installation kit. Install this connector
according to the wire color code listed in Table 3-9 and as shown in Figure 3-31.
Figure 3-31: IND560x-PAB (J2) to IND560x (J1) Connection
Table 3-9: IND560x-PAB (J2) to IND560x (J1) Wiring Color Code
IND560x-PAB Terminal
J2-2
J2-3
the J1-BATTERY port on the IND560x-PAB (Figure 3-32). The wire color for each of these
connections is listed in Table 3-10. Secure any loose battery pack wires to the housing of the
IND560x as shown in Figure 3-32.
Figure 3-32: PAB Battery Pack Connector (left) and Battery Cable Installation
Table 3-10: IND560x-PAB (J1) Wiring Color Code
J1-BATTERY 1-
J1-BATTERY 2+
IND560x Main Board Terminal
J1-2
J1-3
Terminal Wire Color
White
Blue
METTLER TOLEDO IND560x Installation Manual
Wire Color
Red
Black
3-25