LUCCI Air AIRFUSION A Manual De Operación, Instalación Y Mantenimiento página 9

Airfusion Type A Installation Instructions
-
: SPEED DECREASE BUTTON (C): Press the button to decrease the fan speed. The LED indicator (D) will indicate
the fan speed (1-12 speed) accordingly.
:
LED INDICATOR (D):

Indicates the fan current fan speed level (1-12 speed).

Indicates the current timer setting time (1 hour, 2 hours, 4 hours, 8
hours).
: REVERSE FUNCTION BUTTON (E): Press the button to activate the
reverse running function. The fan must be operating to activate the reverse
function.
NOTE: When the fan can NOT detect the rotary redirection it will stop,
just press the " " button two times to activate the fan again.
:
FAN TIMER BUTTON (F): Press the button to start programming the
timer to switch the fan off automatically, or to cancel the timer. Press the
button to set timer at 1h →2h →4h →8h → Timer OFF. The LED indicator
(D) will indicate the fan timer (1H, 2H, 4H, and 8H) accordingly.
: LIGHT CONTROL BUTTON (G): Press the button to turn on/off the light.
: LIGHT DELAY BUTTON (H): Press the button to activate the light delay function, which will turn off the light 3
minutes later.
REPAIRING THE FAN RECEIVER & REMOTE
Should the remote and receiver lose control after installation or during use, the pairing of the remote and the receiver
must be repaired. Below are the operating symptoms and method to repair the pairing of the DC ceiling fan remote
and receiver.
Issues:

Loss of control - Fan is only running at high speed after installation

Loss of control - No reverse function after installation

Loss of control - Remote cannot communicate with the receiver
8 | P a g e
Fig. 12