Before Installation - LUCCI Air AIRFUSION A Manual De Operación, Instalación Y Mantenimiento

Airfusion Type A Installation Instructions
8) The fan should be mounted so that the blades are at least 2.1 metres above the floor for Australia.
9) This fan is suitable for indoor use only. Mounting the fan in a situation where it is subject to water or moisture is
dangerous.
10) Only an authorized electrician should execute the installation.
Unpack your fan and check contents. You should have the following:
1 Canopy x 1
2 Down rod x 1
3 Coupling cover x 1
4 Motor assembly x 1
5 Blades x 3
6 Bottom cover x 1
7 Plastic anchors x 2
8 Blades screws x10
9 Wood screws x 2
10 Balance kit x 1 set
11 Remote x 1 set
3 | P a g e

BEFORE INSTALLATION

Fig. 1