Introduction; Guarantee; Expiry Of Guarantee; Safety Regulations And Accident Prevention - GASPARDO HCS Instrucciones Empleo Y Para El Montaje

1.0 INTRODUCTION

This manual gives all the specific information that you need for a
proper use of the equipment. After buying the instrument, read the
manual carefully and refer to it any time you have doubts on how
to use the equipment or when you have to carry out maintenance
operations. Keep the manual on the machine. If this is not possible,
keep it ready to hand.
Regular operation depends on the correct use and adequate
maintenance of the equipment. It is advisable therefore to observe
scrupulously what is described in order to prevent any inconve-
niences that could prejudicate proper operation and duration. The
equipment must be used, maintained and repaired by trained per-
sonnel that have been instructed on the dangers arising from its
incorrect use. All the safety regulations and provisions for technical
safety, occupational medicine and the Highway Code must also be
observed. The manufacture is not liable for any damage to property
or injury to persons due to modifications made to the equipment by
the user. It is just as important to keep to what is described in this
booklet since the Manufacturer declines all responsibility due
to negligence and non-observance of these rules. At any rate
the Manufacturer is available to assure immediate and accurate
technical assistance and all that may be necessary for the improved
operation and better performance of the equipment.

1.1 GUARANTEE

The guarantee is valid for a year, against all defects of material,
from the date of delivery of the equipment.
On delivery, check that the equipment has not been damaged du-
ring transport and that the accessories are integral and complete.
POSSIBLE CLAIMS MUST BE PRESENTED IN WRITING WITHIN
EIGHT DAYS OF RECEIPT.
The purchaser will enforce his rights on the guarantee only when
he has respected the conditions concerning the benefit of the
guarantee, set out in the supply contract.

1.1.1 EXPIRY OF GUARANTEE

Besides what has already been set out in the supply contract,
the guarantee expires:
- If the limits set out in the technical data table are overshot.
- If the instructions set out in this booklet have not been carefully
followed.
- If the equipment is used badly, defective maintenance or other
errors by the client.
- If modifications have been carried out without written authorization
of the manufacturer and if non original spare parts have been
used.
cod. G19502721
2.0 SAFETY REGULATIONS AND ACCIDENT PRE-
VENTION
Carefully read all the instructions before using the equipment;
if in doubt, contact the technicians of the Manufacturer's de-
aler. The manufacturer declines all responsibility for the non-
observance of the safety and accident prevention regulations
described below.
General norms
- The equipment is exclusively designed for a specific agricultural
use. Any other use is considered improper.
- In the event of improper use, the Manufacturer declines all re-
sponsibility for any damage to persons and property. The risks
created by improper use are the sole responsibility of the user
of the equipment.
- Specific use also includes observance of the operating and
maintenance conditions laid down in this manual.
- The relevant generally accepted accident-prevention regulations
must be observed, in addition to the latest standards relative to
safety measures, occupational medicine and the highway code.
- The Manufacturer declines all responsibility for unauthorized
modifications made to the equipment.
Maintenance in safety
During work and maintenance operations, use suitable per-
sonal protection gear:
Overalls
- Before performing work on the electrical system, disconnect the
battery.
- If welding operations need to be performed either on the tractor or
on the mounted equipment, disconnect the battery power supply.
- Do not carry out maintenance or cleaning work before the engine
has been switched off, the hand brake has been put on and the
tractor has been blocked with a suitably sized stone under each
wheel.
- All maintenance work, adjustments and preparation for opera-
tion, must be carried out with the power take-off of the tractor
disconnected, the seeder on the ground on its supporting feet,
the tractor not running, the wheels blocked and the key turned
off.
- The spare parts must correspond to the manufacturer's specifi-
cations. Use only original spares.

ENGLISH
Gloves Shoes Goggles Ear
defenders
13