Tabla de contenido
Publicidad
3.3 IDENTIFICATION
Cada equipo está provisto de una tarjeta de identificación (Fig. 2),
en la que se encuentran:
1) Marchio CE;
2) Marca del fabricante;
3) Nombre, razón social y dirección del Fabricante;
4) Tipo de Accesorio;
5) Número de matrícula;
6) Año de fabricación.
Estos datos tendrán que mencionarse para cualquier necesidad
de asistencia o repuestos.
3.4 FIXING THE SPEED SENSOR
Follow the installation instructions provided on page 77.
SPEED SENSOR POSITIONING
Insert the sensor into the support and adjust it to a distance of
about 3÷5 - 10÷15 mm from the reading arm (Fig. 3).
IMPORTANT
tie all the electric cables to the non-moving parts of the
equipment with the cable ties supplied.
3.5 CONNECTION
The monitor must always be fixed inside the tractor cab, by means
of the adhesive support provided, in a comfortable position for the
operator. It must be connected to the 12 V battery (see G, Fig.
4). The monitor is equipped with a battery which maintains the
inputted data in the memory.
The monitor is protected against short circuit and polarity inversion
thanks to a self-resetting thermal fuse (polyswitch). When this pro-
tection triggers, the monitor goes off. Before switching the monitor
on again, we recommend disconnecting it from the battery of the
tractor for a few minutes.
cod. G19502721
USE AND MAINTENANCE
2
fig. 2
fig. 3
G
fig. 4
3
1
12 V
ENGLISH
4
5
6
15
Publicidad
Tabla de contenido
