Charging - Tronic KH 3106 Instrucciones Para El Manejo Y La Seguridad

RZ_KH3106_Energiestation.qxd4

3. Charging

Before using the device, satisfy
yourself that the energy station, the
connection cables and the mains
charging adapter are in perfect
condition.
Danger!
Never use a damaged connection
cable. Short-circuit hazard!
a) Commissioning – initial charging!
The energy station is delivered with a
low-level pre-charged battery. Prior to
initial usage it must therefore be
charged as described under b) or c).
Caution! The battery can lose
considerable capacity should you
use the energy station without fully
charging it beforehand!
07.11.2003 9:27 Uhr
b) Charging via the power socket
The charging time for a completely
discharged battery is approximately
15 hours:
Insert the device plug of the mains
charging adapter in the charging
socket at the back of the device.
Insert the mains charging adapter
in the socket.
The energy station is charged by
turning the main switch at the front
to the "CHA" position.
While the energy station is charg-
ing, the red LED "Empty" will be
illuminated.
When the battery is nearly charged,
the green LED "Full" will start to
be faintly illuminated. As soon as it
is fully illuminated you can remove
the mains charging adapter again.
46
Seite 46