Gaggia Milano CLASSIC Instrucciones Para El Uso página 22

ENGLISH
22
4. Turn the machine on by pressing the on/off
button (Fig.1-2).
Dispense 2 cups of water (about 150 ml
each) from the steam wand (see the chapter
"Preparing hot water"), and switch off the
machine by pressing the on/off button (Fig.1-
2).
5. Let the descaling solution take effect for
approximately 20 minutes with the machine
turned off.
6. Turn on the machine by pressing the on/off
button (Fig.1-2).
Dispense 2 cups of water (about 150 ml each)
from the steam wand, switch off the machine
by pressing the on/off button (Fig.1-2) and
leave it off for 3 minutes.
7. Repeat the water dispensing described in step
6, until the water tank is completely empty.
8. Rinse the water tank and fill it with fresh
drinking water.
9. Place a container under the steam wand. Open
the steam/hot water knob (Fig.1-7) slowly by
turning it counter-clockwise.
Press the brew button (Fig.1-1) and the steam
button (Fig.1-3).
10. Dispense the whole water tank content through
the steam wand. To stop dispensing, press the
brew button (Fig.1-1) and the steam button
(Fig.1-3) again and close the knob by turning
it clockwise.
11. Fill the water tank with fresh drinking water.
12. Place a suitable container under the filter
holder.
13. Press the brew button (Fig.1-1) and dispense
all the water in the tank. Once the water tank
is empty, stop dispensing by pressing the brew
button (Fig.1-1) and the steam button (Fig.1-3)
again. At the end, empty the container.
14. Remove the filter holder from the unit by
turning it from right to left and rinse it with
fresh drinking water.
15. Repeat the operations from step 8 once again,
for a total of 4 tanks. The machine is now ready
to be used.
16. The descaling cycle is now complete.
17. Refill the water tank with fresh water. If
necessary, load the circuit as described in the
chapter "Loading the Circuit".
4219-460-45901 MANUAL GAG. CLASSIC-2019 RI9380 USA EN-FR-ES.indd 22 03/12/2018 14:40:13