Connecting Built-In Grill To Control Unit - bora PT 11-000 Instrucciones De Montaje Y De Uso

... Installation
► Mount the toggles. Ensure that dimension 18,5 mm is maintained when the
knobs are in "0" position.
► If the two toggles are not at the same distance from the power
control sleeves, adjust the distance with the adjusting screw in
the toggle shaft, using the enclosed Allen wrench. Both
toggles must be at a distance of 18,5 mm from the respective
sleeve (see above diagram).

Connecting built-in grill to control unit

► Plug the 12-pin adapter of the grill into the respective socket of the control unit.
► Insert the sensor heads of the temperature controller into the recesses for the
heating elements, observing the colour codes.
Ensure that the sensor heads engage properly in the recesses!
Left sensor head
↓
front grill zone
Right sensor head
rear grill zone
Cover
Toggle
.
↓
Power control
sleeve
Allen
wrench
Colour mark
13