Remapping The Swc (Steering Wheel Control) Buttons - Axxess ASWC-1 Manual Del Usuario

Remapping the SWC buttons
Let's say you have ASWC-1 programmed to your radio and you want
to change the button assignment for the steering wheel controls. For
instance, you would like Seek Up to be Mute. Follow the steps below to
remap the steering wheel control buttons:
1) Make sure the ASWC-1 is visible, so you can see the LED flashes to
confirm button recognition.
Tip: Turning off the radio is recommended.
2) Within the first 20 seconds of turning the ignition on,
press and hold the Volume Up button on the steering wheel until the
LED goes solid.
3) Release the Volume Up button and the LED will go out; Volume Up
has now been programmed.
4) Follow the list in the Button Assignment Legend (p. 11),
to reference the order in which the steering wheel control buttons
need to be programmed.
Note: If the next function on the list is not on the steering wheel;
press the Volume Up button for 1 second, until the LED comes
on, and then release the button. This will tell the ASWC-1 that the
function is not available and it will move onto the next function.
5) To complete the remapping process, press and hold the Volume Up
button on the steering wheel until the LED on the ASWC-1 goes out.
ASWC-1 Installation
10