Swing Away Hangers; Swing Away Hangers With 4-Way Latch - Ki Mobility Liberty FT Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
F. Swing Away Hangers
WARNING: Ensure hangers are locked in place before using or riding wheelchair. Unlocked
hangers while using or operating the chair could result in a fall or loss of control.
1. Installation
a. Place swing away pivot saddle into the receiver on front frame tube with the footrest facing
either inward or outward from the frame (Fig. 6).
b. Rotate the footrest so that it aligns with the frame until it locks into place in the latch block
(Fig. 7).
2. Swinging the Footrest Away
a. Push release latch toward the frame.
b. Rotate footrest outward or inward as desired.
3. Removal
a. To remove footrest, push release latch toward the frame.
b. Lift the footrest straight upward to remove. You may also swing the footrest inward or out-
ward before lifting it off.
Fig. 6
G. Swing Away Hangers with 4-Way Latch
1. Installation
a. Place swing away pivot saddle into the receiver on front frame
tube (Fig. 8:A).
b. Rotate the footrest so that it aligns with the frame and locks into
place in the latch block (Fig. 8:B).
2. Swinging the Footrest Away
a. Push or pull on release latch.
b. Rotate footrest outward or inward as desired.
3. Removal
a. To remove footrest, push or pull release latch.
b. Lift the footrest straight upward to remove. You may also swing
the footrest inward or outward before lifting it off.
Fig. 7
17
Fig. 8
A
B