Wheel Locks - Ki Mobility Liberty FT Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
Q. Wheel Locks
1. Adjusting Wheel Locks
a. Use a 10mm wrench or socket to loosen (do not remove) hex bolts (Fig. 31:A) on the
mount plate (Fig. 31:B).
b. Slide mount plate forward or rearward to achieve proper locking.
c. Retighten hex bolts.
Fig. 31
NOTE: Always loosen and tighten wheel hardware by alternating between the two bolts while
loosening/tightening a little at a time. This prevents overclamping on one set of hardware which
can lead to binding of the fasteners and increased difficulty in removal.
A
28
B