Routine Maintenance - Ki Mobility Liberty FT Manual De Instrucciones Y Garantía

B. Routine Maintenance
1. Weekly:
a. Check wheel locks to be sure they are adjusted correctly.
b. Check axle sleeves to ensure the axle sleeve nuts are tight.
c. Check for broken, bent or loose spokes.
d. Check that casters spin freely.
e. Inspect tires and casters for wear spots.
f. Check pneumatic tires for proper inflation.
g. Ensure hand grips do not rotate or pull off.
2. Monthly:
a. Inspect rear wheel axles and tighten if necessary.
b. Inspect caster housing bearings for hair build up and remove if necessary.
c. Inspect wheel locks to be sure assembly is tight. Make sure wheel locks properly engage
the tires.
d. Check that all fasteners are tight and secure.
e. Inspect frame for any deformities, defects, cracks, dimples or bends. These could be signs
of fatigue in the frame which could result in a failure of the chair. Discontinue use of the
wheelchair immediately and contact your authorized Ki Mobility dealer.
3. Annually:
a. Have wheelchair checked and adjusted by a qualified technician.
CAUTION: Before using chair after adjustments are made, ensure all fasteners are tight and se-
cure.
CAUTION: Do not overtighten fasteners as this could damage the frame.
VI. MAINTENANCE
31