About this manual
1. About this manual
The purpose of this manual is to describe the INGECON SUN 1Play units and to provide appropriate information
for their correct reception, installation, start-up, maintenance and operation.
1.1. Scope and nomenclature
This manual is applicable to the following units:
Complete name
INGECON SUN 1Play 2.5TL M
INGECON SUN 1Play 2.7TL M
INGECON SUN 1Play 3TL M
INGECON SUN 1Play 3.3TL M
INGECON SUN 1Play 3.68TL M
INGECON SUN 1Play 4.6TL M
INGECON SUN 1Play 5TL M
INGECON SUN 1Play 5.5TL M
INGECON SUN 1Play 6TL M
This document will refer to the various models by both their complete name and their abbreviation. Similarly, it will
refer generically to any of the models in the INGECON SUN 1Play families with the terms unit or inverter.
1.2. Recipients
This document is intended for qualified personnel.
The status of qualified personnel referred to in this manual will be, as a minimum, that which meets all the
standards, regulations and laws regarding safety applicable to the tasks of installing and operating this unit.
The responsibility for designating qualified personnel will always fall to the company to which the personnel
belong. It is necessary to decide which workers are suitable or not for carrying out specific work to preserve their
safety at the same time as complying with occupational safety legislation.
These companies are responsible for providing appropriate training in electrical equipment to their personnel and
for familiarizing them with the contents of this manual.
1.3. Symbols
This manual uses various symbols to emphasize and highlight certain texts. The general meanings are explained
below.
General warning.
Electrical danger.
Hot surface.
ABE2011IQM01_C - Installation and Operation Manual
Abbreviation
2.5TL M
2.7TL M
3TL M
3.3TL M
3.68TL M
4.6TL M
5TL M
5.5TL M
6TL M
General information.
Read the section indicated in this manual.
Prohibition.
Ingeteam
DE
EN
ES
FR
IT
PT
63